← Back to Reference Database RI Chart SG Chart Fluorescence Hardness

Heliodor

Last updated: April 2026

The yellow to greenish-yellow variety of beryl, colored by iron (Fe³⁺). Also called Golden Beryl when a pure yellow. Heliodor refers to yellowish-green to golden-yellow stones. Distinguished from citrine by higher RI and SG; from yellow sapphire by lower RI/SG and uniaxial character; from yellow chrysoberyl by lower RI/SG.

Heliodor has a specific gravity of 2.72 and a refractive index of 1.568–1.580, with a Mohs hardness of 7.5–8.0. It is uniaxial −.

Physical & Optical Properties

RI Range1.568–1.580
SG Range2.68–2.74
SG Typical2.72
Hardness (Mohs)7.5–8
Crystal SystemHexagonal
Optic CharacterDR Uniaxial (−)
Birefringence0.006
Dispersion0.014
Fluorescence LWInert
Fluorescence SWInert
Chelsea FilterInert
PleochroismWeak
ColorsYellow Orange, Green
SpeciesBeryl
Yellow OrangeGreen

Measured with a polariscope, a refractometer, a hydrostatic balance, a Chelsea filter, a UV torch, a loupe, a darkfield loupe and a spectroscope — step-by-step for each.

Through the refractometer

Heliodor reads 1.571 – 1.577 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 REFRACTIVE INDEX DORotate the stone through a full 360°, reading both edges atevery 45°. SEETwo boundaries 0.006 apart — so close that at this size theyread as one thick line. On the instrument they separate onlywith a steady head and a sharp edge. MEANSThat gap IS the birefringence. Take max minus min across thewhole rotation — a single position understates it, so onereading is an incomplete one. Computed from gems.json — edge positions are arithmetic, not drawn. RI increases upward; the field above the boundary is the dark one.

Drawn from the refractive index above, on a 1.40–1.81 scale. How to take this reading.

Through the polariscope

Heliodor Blinks 4× per turn (DR) 0° 45° 90° 135° ROTATION BETWEEN CROSSED POLARS Heliodor blinks light-dark four times in a full turn. That is doubly refractive. It does NOT tell you uniaxial from biaxial — that is the optic figure, which needs a conoscope. Computed from optic character and transparency in gems.json. A polariscope separates singly refractive, doubly refractive and aggregate — it does not show the optic sign.

Drawn from the optic character and transparency above. A polariscope separates singly refractive, doubly refractive and aggregate; the optic sign needs a conoscope. How to take this reading.

Specific gravity, and what it rules out

Heliodor SG 2.68–2.74 WHERE IT SITS, AND WHAT ELSE IS THERE 1.0 2.0 3.0 4.0 5.0 SPECIFIC GRAVITY 19 other species in the table overlap this range, so a reading here narrows the field to 20 rather than naming the stone. Combine it with a refractive index to separate what is left. Computed from the specific-gravity range in gems.json. Hydrostatic weighing — the bench method this site recommends; heavy liquids are toxic and regulated. Faint ticks are the other species in the table.

Drawn from the specific-gravity range above, against every other species in the table. How to take this reading.

Through the dichroscope

Heliodor Two colours (dichroic) BEST ORIENTATION ROTATED 45° — THE NULL At its best orientation Heliodor shows pale yellow in one window and greenish-yellow in the other. Rotate the instrument 45° and the two windows become IDENTICAL — the null. So "both windows the same" means either the stone is singly refractive or you are holding the instrument at the wrong angle, and the only way to tell is to turn it. Computed from pleochroism and pleochroic colours in gems.json. Window tints are derived mechanically from the colour words, not chosen; a neutral pair depicts no colour at all.

Drawn from the pleochroism above. Two windows that match mean either no pleochroism or the wrong angle — turn the instrument to tell. How the dichroscope compares.

AquamarineEmeraldGosheniteMorganiteRed Beryl

Key Differentiators

Natural vs. Synthetic

Synthetic heliodor is commercially available (Hydrothermal). Distinguishing natural from synthetic typically requires microscopic examination of internal features.

Loupewise Pro includes a two-phase natural vs. synthetic testing protocol for Heliodor.

Common Simulants

Commonly Confused With

Commonly confused with: Citrine, Yellow Topaz, Chrysoberyl.

Treatments

Measurement Guides

How to Identify a GemstoneHow to Measure Specific GravityHow to Use a RefractometerUV Fluorescence Testing

Identifying a heliodor? Loupewise walks through these tests in order — RI, SG, fluorescence, and more.

Try Loupewise Free →

Studying for the GIA, FGA, or FEEG practical? Heliodor is one of the 132 species in Loupewise’s drill and exam pool — practice identifying it from its measured properties under timed exam conditions.

Practice exams →